Combining Solutions of the Axial Assignment Problem

Automation and Remote Control - We consider the NP-hard integer three-index axial assignment problem. The task of optimal combination of the pairs of feasible solutions of the problem is posed, and...     

A multimode CMOS PA with a single propagation path

Analog Integrated Circuits and Signal Processing - In this paper a four mode 130 nm RF CMOS power amplifier (PA) in a single propagation path topology is presented and evaluated with IEEE...     

Konzept einer autarken elektrischen und thermischen Energieversorgung auf Basis von Photovoltaik

A photovoltaic system could supply a single-family house with electrical power, warm water, and room heat if the energy would be distributed over the year to suit the load profile. However, storage systems for this are not state of the art yet. A concrete example is used to estimate which parameters such a power storage system should have. A suitable electrochemical reaction system based on inorganic salt mixtures is proposed. The German Federal Ministry of Education and Research is currently funding the development of a world storage facility based on the same reaction system.     

Review on recent advances of zinc substituted cobalt ferrite nanoparticles: Synthesis characterization and diverse applications

Researchers have taken a prodigious consideration in characterizing and synthesizing zinc substituted cobalt ferrite nanoparticles because of their substantial applications across diverse technological and industrial fields. Zinc substituted cobalt ferrite nanoparticles are a class of lenient magnetic nanomaterials, which have potentially high magnetic, optical, electrical, and dielectric properties. These properties include a high value of permeability, low power losses, permittivity, saturation magnetization, coercivity, resistivity, and other beneficial properties that make them promise candidates for applications in various fields. These ferrites are also used in biomedical areas such as MRI and cancer treatments. In electronic fields, zinc substituted cobalt ferrite nanoparticles are used to make transducers, transformers, biosensors, and sensors. Apart from these advantages, they are found in our everyday electronic and electrical appliances like LED bulb, refrigerator, mobile charger, TV, microwave oven, juicer, washing machine, mixer, iron, printer, laptop, mobile, desktop, etc. Hence, the current review reports some properties of these spinel ferrites and emphasizes the different synthesis techniques that can be used to prepare them. Afterward, the impact of dopant on the materials' properties, the characterization techniques, and the momentous application in the present era have been well discussed.     

A novel strategy based on salp swarm algorithm for extracting the maximum power of proton exchange membrane fuel cell

Cell temperature and water content of the membrane have a significant effect on the performance of fuel cells. The current-power curve of the fuel cell has a maximum power point (MPP) that is needed to be tracked. This study presents a novel strategy based on a salp swarm algorithm (SSA) for extracting the maximum power of proton-exchange membrane fuel cell (PEMFC). At first, a new formula is derived to estimate the optimal voltage of PEMFC corresponding to MPP. Then the error between the estimated voltage at MPP and the actual terminal voltage of the fuel cell is fed to a proportional-integral-derivative controller (PID). The output of the PID controller tunes the duty cycle of a boost converter to maximize the harvested power from the PEMFC. SSA determines the optimal gains of PID. Sensitivity analysis is performed with the operating fuel cell at different cell temperature and water content of the membrane. The obtained results through the proposed strategy are compared with other programmed approaches of incremental resistance method, Fuzzy-Logic, grey antlion optimizer, wolf optimizer, and mine-blast algorithm. The obtained results demonstrated high reliability and efficiency of the proposed strategy in extracting the maximum power of the PEMFC.     

Manganese oxides treated with organic compounds as catalysts for water oxidation reaction

Manganese oxides of different crystalline structures: α-MnO₂, δ-MnO₂, α,γ-MnO₂ and Mn₂O₃; were treated with the organic compounds picolinic acid, ethylenediamine and pyridine; and were applied as catalysts in the chemical water oxidation reaction using Ce(IV) ammonium nitrate as sacrificial oxidant. The treatment led to modifications in the oxides properties, such as reduction of the particle size, increase of surface area and partial reduction of Mn⁴⁺ to Mn³⁺ for the Mn(IV) oxides, or of Mn³⁺ to Mn²⁺ for Mn₂O₃, because of favored interactions of the organic molecules with the lattice planes with higher d spacing. Oxygen evolution reaction (OER) tests showed the superior catalytic activity of the treated Mn(IV) oxides, for instance α,γ-MnO₂-en presented TOF five times higher than pure α,γ-MnO₂. The increase in surface area as well as the higher Mn³⁺ content caused by the treatment of the Mn(IV) oxides were correlated with the improvement in the OER catalytic activity.     

Real-time organic aerosol chemical speciation in the indoor environment using extractive electrospray ionization mass spectrometry

Understanding the sources and composition of organic aerosol (OA) in indoor environments requires rapid measurements, since many emissions and processes have short timescales. However, real-time molecular-level OA measurements have not been reported indoors. Here, we present quantitative measurements, at a time resolution of five seconds, of molecular ions corresponding to diverse aerosol-phase species, by applying extractive electrospray ionization mass spectrometry (EESI-MS) to indoor air analysis for the first time, as part of the highly instrumented HOMEChem field study. We demonstrate how the complex spectra of EESI-MS are screened in order to extract chemical information and investigate the possibility of interference from gas-phase semivolatile species. During experiments that simulated the Thanksgiving US holiday meal preparation, EESI-MS quantified multiple species, including fatty acids, carbohydrates, siloxanes, and phthalates. Intercomparisons with Aerosol Mass Spectrometer (AMS) and Scanning Mobility Particle Sizer suggest that EESI-MS quantified a large fraction of OA. Comparisons with FIGAERO-CIMS shows similar signal levels and good correlation, with a range of 100 for the relative sensitivities. Comparisons with SV-TAG for phthalates and with SV-TAG and AMS for total siloxanes also show strong correlation. EESI-MS observations can be used with gas-phase measurements to identify co-emitted gas- and aerosol-phase species, and this is demonstrated using complementary gas-phase PTR-MS observations.     

Impact of spinel forming systems (Fe-/Mg-/Mn-Al-O) as functional coating materials for carbon-bonded alumina filters on steel melt filtration

Since solid, non-metallic inclusions influence considerably the quality of casted steel products, carbon-bonded alumina foam filters are used in secondary metallurgical treatments to remove these particles from steel melts. In order to attain a significant improvement of the filtration process, five different carbonaceous spinel compounds from the Fe-/Mg-/Mn-Al-O systems are applied on carbon-bonded alumina filters in this study and investigated with regard of their filtration efficiency. However, these spinel compounds decompose partially during sintering at 1400?°C under reducing atmosphere, wherefore the resulting coatings contain not only spinel compounds, but also oxidic and metallic components. The subsequent interaction with molten steel leads to the development of multicrystal structures on the filter surface, which stem from interfacial reactions between coating materials, molten steel, and inclusions. As a result of this procedure, a reduction of almost 60% alumina inclusions is measured with the aid of an automatic SEM, whereby spinel compounds from the Fe-Mn-Al-O system achieve highest filtration efficiencies.     

Experience of Using the Home-Made Monitron Automated Hydrostatic-Leveling System for Monitoring of Hydraulic Structures

Power Technology and Engineering - The monitoring of hydraulic structures as high-risk facilities is discussed. Monitoring should ensure the reliability and functioning of a hydraulic structure...